Dullabh Commercials
Call : +91- 9820967337

Our Products

Gallery

1. Cardan shaft (Propeller shaft) :

Propeller shaft or Cardan Shaft Manufacturers offer a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.

Drive shafts are carriers of torque: they are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.

Drive shafts frequently incorporate one or more universal joints or jaw couplings, and sometimes a splined joint or prismatic joint to allow for variations in the alignment and distance between the driving and driven components.

2. Universal joint :

Our company is a Universal Joint Manufacturer in India offering universal joint crosses, which are known for their precise design & durability. Manufactured from qualitative raw materials, these crosses are available in various sizes and shapes, thus meeting the requirements of our clients. These are available at most competitive prices for buyers. Universal joint crosses are connectors used to transmit rotary motion from one shaft to another shaft that is not in line with the first, or when alignment varies during service. A coupling that allows different parts of a machine not in line with each other some freedom of movement at the same time as transmitting rotary motion

3. Tie rods ends :

Tie rods may be connected at the ends in various ways, but it is desirable that the strength of the connection should be at least equal to the strength of the rod. The ends may be threaded and passed through drilled holes or shackles and retained by nuts screwed on the ends. If the ends are threaded right- and left-hand the length between points of loading may be altered. This furnishes a second method for pre-tensioning the rod at will by turning it in the nuts so that the length will be changed. A turnbuckle will accomplish the same purpose. The ends may also be swaged to receive a fitting which is connected to the supports. Another way of making end connections is to forge an eye or hook on the rod.

4. Axle shaft :

An axle is a central shaft for a rotating wheel or gear. In some cases the axle may be fixed in position with a bearing or bushing sitting inside the hole in the wheel or gear to allow the wheel or gear to rotate around the axle. In other cases the wheel or gear may be fixed to the axle, with bearings or bushings provided at the mounting points where the axle is supported. Sometimes, especially on bicycles, the latter type is referred to as a spindle. A straight axle is a single rigid shaft connecting a wheel on the left side of the vehicle to a wheel on the right side. The axis of rotation fixed by the axle is common to both wheels. Such a design can keep the wheel positions steady under heavy stress, and can therefore support heavy loads.